Mon–Fri 06:00–20:00  |  Sat 07:00–15:00 biuro@magnumchorula.pl

TDT Inspections – Silo Trailers, Concrete Pumps | Chorula

TDT inspection preparation with TDT authorisation: silo trailers, cement trailers, tankers, concrete pumps. Full documentation. Tel: +48 504 788 385.

TDT inspection of a silo trailer pressure vessel

In Brief

TDT (Transportowy Dozór Techniczny, Polish Transport Technical Inspectorate) is the mandatory certification for pressurised equipment on road vehicles in Poland, equivalent to Germany’s TÜV Druckbehälter certification. Silo trailers require external inspection every 2 years and a full internal inspection with pressure test every 6 years. A vehicle with an expired TDT certificate may not legally transport pressurised cargo and can be stopped by road inspectors (ITD).


The TDT certificate is not a formality. A vehicle with an expired certificate is legally barred from operating as a pressurised vessel — regardless of actual mechanical condition. An ITD inspector can stop it on the road and the consequences for the operator range from fines to towing costs and lost contracts.

PHS Magnum holds TDT (Transportowy Dozór Techniczny) authorisation for repairs and modifications to pressurised devices on road vehicles. We handle the full cycle: technical inspection, parts replacement, documentation, and inspector coordination on our workshop floor.

Inspection intervals for silo trailers

Inspection type Frequency Scope
Periodic external inspection Every 2 years External condition, pressure system, documentation
Detailed inspection Every 6 years Internal tank, weld testing, wall thickness
Interim inspection After any repair to the tank Required before return to pressurised service

Intervals run from the date of the last inspection, not from January 1st. The owner is responsible for submitting the application to TDT on time.

Our four-stage preparation process

Stage 1 — Technical assessment The vehicle arrives on our workshop floor. We inspect all pressurised components: aeration pads, safety valves, fittings, hoses, hatch seals. A written quote is issued within 24 hours.

Stage 2 — Documentation verification Missing or incomplete documentation is the most common reason TDT inspections fail. Required: Equipment Book (Książka urządzenia), previous inspection records, repair protocols, material certificates for any replaced components. We help reconstruct missing documentation where possible.

Stage 3 — Service and repairs Replacement of all components identified in Stage 1: safety valves, aeration pads, hatch seals, pressure hoses. Welding of any cracks, with TDT-compliant documentation.

Stage 4 — TDT inspection with TDT inspector We arrange the inspector’s visit to our floor and are present throughout. After a positive result, the vehicle receives its TDT certificate and can return to pressurised service.

Vehicle types covered

Contact — TDT department

mgr inż. Roland Sobota Tel: +48 504 788 385 biuro@magnumchorula.pl

Mon–Fri 06:00–20:00 · Sat 07:00–15:00

We service vehicles registered in Poland and the DACH region (DE, AT, CH). Communication in Polish and English.

Related: Silo trailer – service · Silo trailer spare parts · TDT failed — what next · Workshop overview · Glossary

Frequently Asked Questions

External inspection every 2 years. Internal inspection every 4–6 years. Pressure test every 6 years or after any tank repair. The exact schedule depends on tank material (aluminium, steel, stainless) and transported medium.

Yes. Tank inspections are mutually recognised across the EU under ADR (6.8) and TPED 2010/35/EU. A Polish TDT certificate is accepted in Germany, Austria, and Switzerland.

Standard preparation: 2–5 working days depending on the vehicle's condition. We recommend contact 4–6 weeks before the certificate expires to allow time for any repairs and parts procurement.

The inspector issues a non-conformity report. The vehicle cannot operate with pressurised loads until defects are resolved. PHS Magnum performs the required repairs and organises the repeat inspection – typically within 3–7 working days.

Pre-booking is required for TDT preparation. Call +48 504 788 385 (Roland Sobota, TDT department) at least 3 weeks before your certificate expires. Emergency cases handled with shorter notice.

Required: pressure vessel logbook (device history), previous inspection protocol, manufacturer documentation for the tank, records of any repairs performed after the last inspection. We help compile and supplement missing documentation.

Yes. We regularly service DACH-region fleets. We have direct access to technical documentation from Spitzer and Feldbinder. EU VAT invoicing available. Communication in Polish, English, and German.

Quotation on request after vehicle inspection — scope depends on the number of components to replace and any welding repairs needed. Pre-inspection review at our workshop: free of charge. Contact: +48 504 788 385.

Contact & Hours

ul. Kościelna 9, 47-316 Chorula

Mon–Fri 06:00–20:00

Sat 07:00–15:00

+48 602 716 551 Contact us
DEKRA ISO 9001:2015 Quality Management Certificate — PHS Magnum

ISO 9001:2015

4 km from the A4 Motorway

180 km from German border

Call Email
Pogotowie Techniczne TIR & SILO +48 602 716 551